Accueil>Instrumentation>>




Rack mount environment monitor

Rack mount server environment monitor Hx531R

Also known as: remote server environment monitoring, computer room monitor, data center thermometer, temperature humidity IP sensor, computer room temperature alert. - temperature
- humidity
- power presence
- flood
- smoke
- air flow
- room entry

Server monitoring system is designed for 19-inch rack mounting, the height is one rack unit - 1U. Model H4531R is prepared for connection of external Pt1000 temperature probe and models H3531R, H7534R are equipped with 1 meter temperature + humidity probe. Unit also contains three binary inputs for detection of two-state events - e.g. power presence, water, smoke, airflow, glass break detection, door contact. Rack unit provides 5Vdc and 12dc power supply for external all sensors and detectors. Large dual line LCD for simultaneous display of temperature, humidity is an advantage. Parameters are easy adjustable from transmitter keyboard or from the computer. State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Environmental monitor is equipped with two relay outputs for alarm indication or control of external devices. Each relay can be assigned to any measured value.

APPLICATIONS - online monitoring of temperature, humidity, power, flood, smoke, airflow, room entry at:

- server and computer rooms
- data centers
- rack monitoring
- industrial Ethernet
- building management and automation
- telecommunication devices
 

Caractéristiques techniques:  
Maximum switching voltage, current, power of relay output: 50V, 2A, 60VA
Operating relative humidity range: 0 to 100%
Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23°C
Temperature measurement accuracy: ±0.4°C
Available temperature units: degrees Celsius, Fahrenheit
Accuracy and range of barometric pressure output: ± 1.3hPa at 23°C range: 600 to 1100hPa
Temperature operating range of case with electronics: -30 to +80°C
Temperature operating range of LCD display: readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Range of RH sensor temperature compensation: -30 to +105°C
Signal for binary inputs: from voltage-less contact, open collector or two-state voltage signal. Inputs are not galvanically isolated.
Minimum pulse length at binary input: 500 ms (shorter pulse may not be detected)
Voltage at open contact: 3.3 V
Low voltage level: 0 to +0.2 V
High voltage level: +3.0 to +30V
Filtering ability of sensor cover: 0.025mm - filter with stainless steel mesh
Protection: IP30 electronics, IP40 sensors
LAN connection: RJ-45 connector
Power: 9 - 30 Vdc, maximum consumption 250mA. For power over Ethernet any PoE splitter is necessary e.g. DWL-P50 from D-Link company
Power connector: co-axial, diameter 5.5 x 2.1 mm
Dimensions of the case: 483 x 44 x 50 mm (W x H x D), one rack unit 1U
Warranty: 2 years